To read the Application Papers on this site you will need Acrobat Reader

Download it for FREE Now

Turbidity & Suspended Solids

Related Products

ZÜLLIG Turbidity and Suspended Solids Sensors are highly accurate nephalometric and absorption systems using focused lenses to monitor and control your application. Thanks to the latest technology, it has become possible to measure turbidity and solids content with only one sensor. The sensor has a flat face without crevices which means fouling is almost eliminated. This makes them ideal for food and wastewater applications.

A single sensor can accurately monitor drinking water after filtration while monitoring the high contamination back flush cycle at several thousand NTU. An integral automatic wiper can be provided for very fatty or oily applications. Drains in the Dairy and Food industry are typical applications. The sensors are of 316 Stainless steel with sapphire, optically ground lenses to ensure they are almost impervious to chemical and mechanical damage. The small size (38 mm dia.) of the body and flat face allows installation into even small lines and drains without restricting flow.

Specifications

Sensor	Turbidity	Suspended Solids
Type of Measurement	Combined multiple-beam concept, with infrared-diode system and beam focusing, wavelength 860nm
Measuring Range	Programmable between 0.001 to 10,000 NTU	0.1 - 400 g/L   SiO2 0.1 - 100 g/L biological sludge
Turbidity Standard Deviation	0.3% of programmed measuring range	Depending on calibration quality
Operating Temperature	0-60 ° C (standard); 0-110° C (optional)
Material in contact with the media	Stainless Steel DIN 1.4436, Sapphire
Pressure Rating	10 Bar
Controller
Optimal Controller	B-Line	B-Line
Power Supply	230 VAC; 24 VDC	230 VAC; 24 VDC
Display	Backlit Dual Screen LED	Backlit Dual Screen LED
Analog Outputs	4 to 20 mA; Dual form C relays	4 to 20 mA; Dual form C relays
Serial Interface	RS 232	RS 232
Housing	IP65 Field mount	IP65 Field mount

Dimensions

TURBIDITY & SUSPENDED SOLIDS PROBE

For other possibilities for inlet concentration monitoring please email us or phone to discuss your application.